Ht-instruments MACROTEST G3 Manuel d'utilisateur télécharger pdf (Page 70)

MACROTESTG3 - COMBIG3

EN - 69

6.8. AUX: MEASURE OF AMBIENT PARAMETERS THROUGH EXTERNAL PROBES

By means of external transducers, this function allows measuring the following

environmental parameters:

°C air temperature in °C by means of thermometric transducer

°F air temperature in °F by means of thermometric transducer

Lux(20) illuminance by means of luxmetric transducer with a 20Lux capacity

Lux(2k) illuminance by means of luxmetric transducer with a 2kLux capacity

Lux(20k) illuminance by means of luxmetric transducer with a 20kLux capacity

RH% air relative humidity by means of humidity transducer

mV input DC voltage (without applying any transduction constant)

Fig. 31: Measurement of environmental parameters through external probes

Touch the icon and then the icon. The screen

to the side appears on the display.

Touch the icon in the lower left corner to set the type of

measurement. The following screen appears on the

display:

2. Move the slide bar reference to select the type of

measurement among the options: °C (temperature in

Celsius degrees), °F (temperature in Fahrenheit

degrees), Lux(20) (illuminance with 20Lux capacity),

Lux(2k) (illuminance with 2kLux capacity), Lux(20k)

(illuminance with 20kLux capacity) ,%RH (relative

humidity), mV (measurement of DC voltage up to 1V)

Confirm the choices by going back to the initial

measurement screen.

Insert in the auxiliary In1 input the transducer necessary for the desired measurement as

shown in Fig. 31

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 107 108

Pas de commentaire

Ht-instruments MACROTEST G3 Manuel d'utilisateur Page 70