Ht-instruments HT4016 Manuel d'utilisateur télécharger pdf (Page 16)

HT4014-HT4016

EN - 15

4.3.6. Continuity Test

WARNING

Before taking any in circuit resistance measurement, remove power from

the circuit being tested and discharge all the capacitors.

Fig. 9: use of clamp for continuity measure

1. Select the

Ω/

function (HT4014 only) or the “

”

function (HT4016 only).

2. Insert the test leads into the jack, the red plug into V/Ω jack, and black plug into COM

jack, like showed in Fig. 9.

3. Insert the two long ends of test leads to the desired circuit. The reading will be

displayed while the buzzer sounds when the resistance value is lower then 40Ω

approximately.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Pas de commentaire

Ht-instruments HT4016 Manuel d'utilisateur Page 16