Ht-instruments HT9015 Manuel d'utilisateur télécharger pdf (Page 14)

HT9014 - HT9015

EN - 13

4.3.6. Temperature measurement

CAUTION

Do not allow the temperature sensor to contact a surface that is energized

above 30 V RMS or 60 V DC, such voltages pose a shock hazard

Fig. 8: Taking Temperature measurement

1. Rotate the switch on Temp position

2. Pushing MODE key and select the kind of measure. “°C” or “°K” symbols are shown at

display respectively for Celsius or Farheneit temperature measurements

3. Insert the type K bead probe in VΩ CAPHz%Temp and COM inputs terminals

using the standard adapter and observing the correct polarity (see Fig. 8). The

temperature value is shown at display

4. For HOLD and MAX/MIN features please refer to § 4.2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Ht-instruments HT9015 Manuel d'utilisateur Page 14