Ht-instruments HT9022 Manuel d'utilisateur télécharger pdf (Page 32)

HT9022

EN - 30

5.5.1.2. DC power

The screen to the side shows an example of DC power

measurement.

Mod Par Sys Fnz

0.40 kW

19/01-17:00:00

5.5.1.2.1. Key F4 “Fnz” in DC Power measurement

While measuring DC Power, press key F4 (Fnz) to open the

drop-down menu shown on the screen to the side. At each

subsequent pressure of key F4, the cursor will scroll through the

available items, as follows:

• Max: it constantly displays the maximum value of the

measured parameter;

• Min: it constantly displays the minimum value of the

measured parameter;

• Rst: it deletes all stored Max and Min values;

Mod Par OK Fnz

0.40 kW

19/01-17:00:00

• Esc: it goes back to a normal measuring mode.

By pressing key F3 (OK), the selected item is confirmed.

To the side, an example of measurement with active Max

function. The display shows the active function.

Mod Par Sys Fnz

Max DC

0.40 kW

19/01-17:00:00

5.5.1.3. DC voltage and current

The screen shows an example of DC Voltage and Current

measurement.

Mod Par Sys Fnz

80.0 V

20.0 A

19/01-17:00:00

Max

Min

Rst

Esc

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Pas de commentaire

Ht-instruments HT9022 Manuel d'utilisateur Page 32