Ht-instruments MACROTEST 5035 Manuel d'utilisateur télécharger pdf (Page 45)

MACROTEST 5035

EN - 44



If the instrument detects that the earth

cable (green) is not connected, the

screen alongside is displayed for 5

seconds then the initial display is back.

Check the connections of PE conductor

under test.

RCD LOOP

o>1999 Ω

no PE



If a contact voltage U

higher than the

selected limit (U

) is detected the

instrument interrupts the test and emits

a long sound signal at the end of the

test and displays the values

alongside.displays the screen

alongside.

RCD LOOP

o> 50 V

A UL



If no power is detected during the test

the instrument displays the screen

alongside.

RCD LOOP

o c

- - - - - -



If the thermistores of the instrument are

damaged, it displays the screen

alongside.

RCD LOOP

o c



If the instrument gets overheated it

does not permit to effect the tests and

displays the message alongside. Wait

until the instrument displays the initial

screen before proceeding with

measuring.

RCD LOOP

THE PREVIOUS RESULTS CANNOT BE SAVED.

Message

"no PE": the

instrument does

not detect the

protection circuit.

SAVE

Message

"Att UL": a too

high contact

voltage was

detected

Message ">50" o “>25V”:

the instrument detects a contact voltage higher

than the selected limit

(

50V in this case

)

Messagge “hot”:

the instrument is

overheated.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 79 80

Commentaires sur ces manuels

S.imoim.net 04 Dec 2024 | 14:11:18

Text and images you copy will automatically show hereText and images you copy will automatically show here

Ht-instruments MACROTEST 5035 Manuel d'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Ht-instruments MACROTEST 5035