Ht-instruments MACROTEST 5035 Manuel d'utilisateur télécharger pdf (Page 53)

MACROTEST 5035

EN - 52



At the end of the test the instrument

displays the values alongside.

36.5 Ωm

2 0.93 Ω

CAUTION

The display of “Measuring” means that the instrument is measuring. During

this phase never disconnect test leads.

SAVING: The tests can be stored pressing the SAVE key twice

(according to paragraph 5.1).

Note: If START/STOP key was kept pressed, the instrument takes more consecutive

tests.

8. When a new value is acquired the instrument emits a short sound and calculates the

new average value.

9. Press DISP key to show how many measurements are in average value

calculation and the measuring mode.

10. Press CLR key if you want to cancel the medium value of the resistance

and the no. of measurements which are included in the calculation.

Note: Any test with result over 1999Ω is not inserted in the calculation of medium value.

Example: 1

measurement (D=1):

main display: 6,6Ωm

secondary display: 6,6Ωm

measurement (D=1):

main display: 4,15Ω

secondary display: 2,61Ω

measurement (not inserted in the medium value)

main display: >1999Ω

secondary display: 2,61Ω

Earth resistivity value

CLR

DISP

SAVE

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

S.imoim.net 04 Dec 2024 | 14:11:18

Text and images you copy will automatically show hereText and images you copy will automatically show here

Ht-instruments MACROTEST 5035 Manuel d'utilisateur Page 53