Ht-instruments FULLTEST3 Manuel d'utilisateur télécharger pdf (Page 30)

FULLTEST 3

EN - 29

5.5. RCD (RCD)

5.5.1. RCD DISPLAY EXPLANATION

Adjustable/selectable parameters:

TYPE - type of RCD AC, A or B

CHARACTERISTIC - RCD characteristic GENERAL, SELECTIVE or DELAYED

IN - nominal differential current 10, 30, 100, 300, 500, 650 or 1000 mA

MEAS - type of measurement t/1/2IN, t/IN, t/2IN, t/5IN, I or AUTO

POL - test current polarity POS (positive) or NEG (negative)

DELAY – delay time in DELAY characteristic 0  700 ms

Figure 17: Display with RCD test result

1 ..... Selected function.

2 ..... Selected limit contact voltage (25 or 50 V). It can be selected in MENUSETUPCONTACT

VOL. menu.

3 ..... Sub-results - mains voltages UL/N and UL/PE at which the test was carried out.

4 ..... Measurement screen touch-screen key.

5 ..... TYPE touch-screen key to select the type of RCD (AC, A or B) and characteristic (GENERAL,

SELECTIVE or DELAYED). Currently selected type and characteristic are displayed on the bottom

of the key.

6 ..... I

N touch-screen key to select nominal differential current of the RCD (10, 30, 100, 300, 500, 650

or 1000 mA). Currently selected value is displayed on the bottom of the key.

7 ..... MEAS touch-screen key to select the measurement (t

/1/2IN, t/IN, t/2IN, t/5IN, I or AUTO).

Currently selected measurement is displayed on the bottom of the key.

8 ..... POL touch-screen key to select test current polarity (POS - positive or NEG - negative).

9 ..... Test result (in green colour - result OK, in red colour - result not OK).

10 ... Real time clock (hh.mm.ss).

11 ... Unit of the test result (ms).

12 ... Measurement result status (symbol in green colour - result OK, symbol in red colour - result

not OK).

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 91 92

Pas de commentaire

Ht-instruments FULLTEST3 Manuel d'utilisateur Page 30