Ht-instruments MACROTEST G3 Manuel d'utilisateur télécharger pdf (Page 39)

MACROTESTG3 - COMBIG3

EN - 38

Press the GO/STOP key or the START key on the

remote lead. During this whole stage, do not disconnect

the measuring leads of the instrument from the system

under test.

In case of positive outcome, the screen to the side is

shown by the instrument.

Press the SAVE button or touch the icon to save

the measurement (see § 7.1).

6. In case of test failure (measured Isc Max current > set

threshold), the screen to the side is displayed by the

instrument.

Note the presence of the measurement result

highlighted in red.

Press the SAVE button or touch the icon to save

the measurement (see § 7.1).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 107 108

Pas de commentaire

Ht-instruments MACROTEST G3 Manuel d'utilisateur Page 39